Juniper-systems Allegro Top Mounting Bracket Uživatelský manuál stáhnout pdf

Installing the Top Mount Bracket on the Allegro

The top mount bracket for the Juniper Systems Allegro can be used

in a variety of mounting applications. Originally designed for a GPS

antenna mated with a separate GPS receiver system, it can also be

used with Bluetooth devices like barcode scanners, RFID readers, and

standalone GPS devices.

Installing the top mount bracket on the Allegro is a simple seven-step

process. To complete this, you will need a thin, narrow, metal object.

Caution: Do not use a sharp knife as this could damage the case.

1. Remove the existing on-board stylus from the top of the Allegro.

Figure 1: Remove stylus from Allegro

2. Loosen the thumbscrews on the bracket until the nuts reach the

top of the threads. It is not necessary to remove the nuts.

Figure 2: Loosen thumbscrews.

3. Place the mount in position at the top of the Allegro with the

at face of the mount close to the same plane as the Allegro’s

display. See Figure 3.

1 2 3 4

Installing the Top Mount Bracket on the AllegroThe top mount bracket for the Juniper Systems Allegro can be used in a variety of mounting application

Document P/N: 12856-03 Release date: July 2011 E-mail: [email protected] Web page: www.junipersys.comFigure 3: Align mounting surface as close as

Installing the Top Mount Bracket on the AllegroThe top mount bracket for the Juniper Systems Allegro can be used in a variety of mounting application

Document P/N: 12856-03 Release date: July 2011 E-mail: [email protected] Web page: www.junipersys.comFigure 3: Align mounting surface as close as

Žádné komentáře

Juniper-systems Allegro Top Mounting Bracket Uživatelský manuál