Juniper-systems Allegro DOS Quick Start Uživatelský manuál stáhnout pdf

Step 1

Insert the battery pack into the Allegro

1. Push up on the release latches on the sides of

the Allegro to open the battery compartment

door.

2. Place the NiMH battery pack in the left side of

the battery compartment, push down, and

slide it all the way to the right.

Step 2

Close and latch the battery door

1. Push the battery door closed until each release

latch clicks into place.

2. Slide the release latches downward until they

cannot slide any further to securely latch the

battery door closed.

Do not turn on the Allegro yet.

Step 3

Plug the charger into the wall

1. Plug the AC wall charger that came with the

Allegro into the wall socket.

The small green light on the wall adapter

turns on when it is plugged into the wall.

Step 4

Plug the charger into the Allegro

1. Remove the rubber protector from the Allegro’s

external power input jack.

2. Plug the power connector end of the charger

into the Allegro.

Step 5

Turn the Allegro on

1. Push the On/Off button on the Allegro. The

Allegro loads the Windows CE operating

system by default.

As Windows CE loads, various screens appear

that does not require any action until it gets to

the Set Main Battery Parameters screen.

Step 6

Fill out the Set Main Battery Parameters

screen and charge the battery pack

1. Set the charge to 10% and tap on OK.

2. Charge the battery pack until the LED charge

light on the Allegro turns off. This takes 3 to 4

hours the first time you charge the battery.

Allegro CE/DOS

Field PC Quick Start Guide

Complete all of the steps in this guide before using your Allegro CE/DOS

1 2

Shrnutí obsahu

Strany 1 - Field PC Quick Start Guide

Step 1Insert the battery pack into the Allegro1. Push up on the release latches on the sides ofthe Allegro to open the battery compartmentdoor.2. Plac

Strany 2 - Step 8 (optional)

Step 7Set time and dateDouble tap on the clock on your Allegro’sdesktop. Complete the following steps:1. Tap on the correct day on the Date tab.2. Tap