Juniper-systems Allegro DOS Manual Uživatelský manuál stáhnout pdf (Strana 23)

Allegro DOS Owner’s Manual 23

Cleaning the Keyboard

Dirt and debris can get underneath the keyboard bezel. To clean it,

use a coin to pull the bezel up at the recess located at the bottom

of the keyboard and remove it. We recommend that you use warm

water, mild detergent, and a toothbrush to clean the keyboard or

simply brush it out. The Allegro remains sealed during this process.

(Do not direct a high pressure stream of water at the keyboard to

clean it. This action could break the seal, causing water to get inside

the Allegro.)

Reattach the bezel by carefully inserting the top ridge under the

function keys and lowering the bezel down ﬂ at onto the case. Press

down along the sides while aligning the keys through the holes.

❖ Important Note: After you reattach the bezel, check each key to make sure

it is completely free from the bezel. If any part of a key is caught underneath

the bezel, you may not be able to turn the Allegro on or you may hear a

continuous string of beeps.

▲

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 165 166

Žádné komentáře

Juniper-systems Allegro DOS Manual Uživatelský manuál Strana 23