Juniper-systems Allegro 2 User Guide Uživatelský manuál Strana 77

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 119
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 76
Ch 7 Camera 73
Flash
To use the ash, select Flash from the Menu, then select
On. The ash automatically turns on each time you take a
photo. To turn it off, select Flash from the menu and select
Off.
Pictures & Videos Control Panel
To view or change additional settings, select Options from
the Menu soft key. The Camera control panel is shown. Use
the horizontal scrolling menu near the top of the screen to
see what the setting are and make changes as needed.
Geotagging
When pictures are geotagged, the date, time, latitude,
longitude, le name, and notes can be included with the
pictures with the emboss and embed options.
Note: Calibrate the compass and accelerometer before
you use Geotagging. Refer to Chapter 3, Programs and
Settings, Compass and Accelerometer Calibration.
Follow these steps:
1. Turn on GPS by selecting the GPS gadget on the
Home screen and waiting for a x.
Zobrazit stránku 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 118 119

Komentáře k této Příručce

Žádné komentáře